Different types for a wide range of coil feeding applications The decoiler straightener feeder is divided according to the thickness of the coil material. The GLK2 series decoiler straightener feeder is suitable for the automatic production of 0.3-3.2mm thick sheet mater...

Servo Feeding Although servo feeders may be a bit expensive equipment, they are also very versatile equipment for a wide range of material thicknesses and widths. Servo feeders can be programmed separately for different stamping dies, so the changeover reduces many setti...

The decoiler straightener feeder machine needs the supply of electricity and gas to drive the power to run, so the positioning and installation of the electrical and gas route of the whole machine are essential. If the quality of the pneumatic components and other accessories is not up to standard, or incorrect installation, wi...

How to deal with the uncoiler machine failure If the uncoiler machine is abnormal during the operation, stop the process immediately and check it. Please investigate the reasons, adjust, and repair according to the necessity, prevent troubles before they occur. If the un...

Check if the emergency stop button is working properly. ① Turn the [Power] switch to [ON].② Conduct a test run.③ Press the [Emergency Stop] button to stop the operation.④ Start running again.⑤ If there is an abnormality, make necessary repairs. ...